›› 2009, Vol. 29 ›› Issue (7): 837-.

• 论著(临床研究) • 上一篇    下一篇

结构光投影面部三维测量系统的研制

熊耀阳1, 陈晓波2, 孙 健1, 张富强1, 习俊通2   

  1. 上海交通大学 1. 医学院第九人民医院口腔医学院口腔修复科 上海市口腔医学重点实验室, 上海 200011;2. 机械与动力工程学院, 上海 200030
  • 出版日期:2009-07-25 发布日期:2009-09-16
  • 通讯作者: 张富强, 电子信箱:fredzc@online.sh.cn。
  • 作者简介:熊耀阳(1977—), 女, 羌族, 主治医师, 博士;电子信箱: yaoyangx@yahoo.com。
  • 基金资助:

    上海市科委基金(08DZ2271100);上海市重点学科(特色学科)建设项目 (T0202);上海市信息化委员会专项基金(088)

Development of three dimensional facial measurement system based on structured light projection

XIONG Yao-yang1, CHEN Xiao-bo2, SUN Jian1, ZHANG Fu-qiang1, XI Jun-tong2   

  1. 1. Department of Prosthodontics, Shanghai Key Laboratory of Stomatology, College of Stomatology, The Ninth People's Hospital, School of Medicine, Shanghai Jiaotong University, Shanghai 200011, China;2. School of Mechanical Engineening, Shanghai Jiaotong University, Shanghai 200030, China
  • Online:2009-07-25 Published:2009-09-16
  • Supported by:

    Shanghai Science and Technology Committee Foundation, 08DZ2271100; Shanghai Key Discipline Construction Program, T0202; Shanghai Municipal Informatization Committee Foundation, 088

摘要:

目的 研制一种适用于面部外形采集和测量的三维光学测量系统。方法 基于光学三角测量原理,以白光作为光源,应用格雷码与相移组合编码的结构光投影方法,架构系统硬件。以Windows XP为平台,使用Visual C++、HOOPS等工具开发系统软件。结果 建立了结构光投影面部三维测量系统。系统硬件由光栅投影单元、图像采集单元、系统控制单元和机械外观构成;系统软件由点云显示和编辑模块、系统控制模块等组成。系统光源为12 V,工作距离为900 mm,单视角扫描时间为5.5 s,扫描场景为500 mm×400 mm。结论 结构光投影面部三维测量系统具有外形精巧、光源安全、精确度高和测量快速等特点,可用于人体面部外形采集。

关键词: 结构光, 测量系统, 面部外形采集

Abstract:

Objective To construct a system for three dimensional face scanning and measurement. Methods The measurement system was based on the principle of triangulation and the combination of gray-code and phase-shift structured light projection. The system software was developed for Windows XP with the aid of tools such as Visual C++ and Hoops. Results A three dimensional measurement system based on structured light projection was developed. The system hardware was composed of fringe projection unit, image gathering unit, system control unit and mechanical appearance, and the system software was composed of point cloud display and editing module. The lamp house of the system was 12V, the working distance was 900 mm, the scanning time was 5.5 s and the scanning field was 500 mm×400 mm. Conclusion The three dimensional measurement system based on structured light projection is a refined machine with safe light to eyes, and the accuracy and scanning speed are suitable to face scanning.

Key words: structured light, measurement system, face scanning