上海交通大学学报（医学版）

›› 2009, Vol. 29 ›› Issue (11): 1279-.

• 专题报道（口腔修复学） • 上一篇    下一篇

模块化与参数化结合建立牙列缺损三维有限元模型

金文忠1, 黄庆丰1, 魏 斌1, 张富强1, 崔 雯2, 王成焘2   

  1. 上海交通大学 1. 医学院第九人民医院口腔医学院口腔修复科 上海市口腔医学重点实验室, 上海 200011；2. 机械与动力工程学院 生物医学制造与生命质量工程研究所, 上海 200240
  • 出版日期:2009-11-25 发布日期:2009-11-24
  • 通讯作者: 张富强, 电子信箱: fredzc@online.sh.cn。
  • 作者简介:金文忠(1982—), 男, 住院医师, 硕士；电子信箱: mitenike_kim@hotmail.com。
  • 基金资助:

    “十一五”国家科技支撑计划重点项目（2007BAI18B05）；上海市科学技术委员会资助项目（08DZ2271100）；上海市重点（特色）学科建设项目（T0202）

Establishment of finite element models for dentition defect using modular and parametric models

JIN Wen-zhong1, HUANG Qing-feng1, WEI-Bin1, ZHANG Fu-qiang1, CUI Wen2, WANG Cheng-tao2   

  1. 1. Department of Prosthodontics, Shanghai Key Laboratory of Stomatology, College of Stomatology, The Ninth People's Hospital, School of Medicine, Shanghai Jiaotong University, Shanghai 200011, China；2. Institute of Biomedical Manufacturing and Life Quality Engineering, School of Mechanical Enginieering, Shanghai Jiaotong University, Shanghai 200240, China
  • Online:2009-11-25 Published:2009-11-24
  • Supported by:

    The Eleventh Five Year Plan National Key Science and Technology Project, 2007BAI18B05; Shanghai Science and Technology Committee Foundation, 08DZ2271100; Shanghai Leading Academic Discipline Fund, T0202

PDF (PC)

1288

摘要：

目的 建立下颌双侧末端游离缺失修复方案的有限元模型库。方法 将模块化建模与参数化建模相结合，利用HyperMesh 7.0、UG 5.0、Abaqus 6.5软件，建立下颌双侧末端游离缺失(765-567)及其不同修复设计方案的三维有限元模型。结果 获得有限元模型导入Abaqus 6.5软件，可直接运行，无任何信息丢失现象；模型临床几何相似性良好。结论 成功建立下颌双侧末端游离缺失及其修复方案的三维有限元模型库，建模过程快速高效，进一步细化了口腔组织模块化建模库。

关键词: 末端游离缺失, 修复体, 模型库, 有限元

Abstract:

Objective To establish the three-dimensional finite element model libraries for mandibular bilateral distal-extension prosthesis. Methods Models for bilateral mandibular free-end edentulous (765-567) and parametric prosthetic models were combined to establish the three-dimensional finite element model libraries by means of HyperMesh 7.0, UG 5.0 and Abaqus 6.5 softwares. Results The established finite element model libraries worked well with Abaqus 6.5 software, with no information loss. The models had satisfactory geometric configuration. Conclusion The three-dimensional finite element model libraries for bilateral mandibular free-end edentulous and mandibular bilateral distal-extension prosthesis have been rapidly established.

Key words: free-end edentulous, prosthetic, model library, finite element